29 May 2014

579. TEMPerHum (0c45:7402 ) on debian linux wheezy

Yet another little usb device from PC sensors (I seem to have been giving them a fair amount of money recently ).

This is the device in question: http://pcsensor.com/index.php?_a=product&product_id=178 (note that I buy my devices via ebay where the prices are apparently always the campaign ones -- I paid AUD25 , not USD80)

It didn't come in a box so I have no scans or shots to show.

[See here for the regular TEMPer USB device (0c45:7401), and here for the TEMPer 1K4  (0c45:7403) USB thermocouple reader. Note that since the temper-usb code is in  a lot of flux you can't use the line numbers in those posts directly -- you'll have to read and understand the code before pasting it in. Luckily, it's quite simple -- even I managed to sort it out!]

I couldn't get temper-usb to work even when making (what I consider) the necessary edits, but instead got lots of errors (including " usb.USBError: could not detach kernel driver from interface 1: No data available"). So I finally gave up.

Instead, web searching led me to http://edorfaus.wordpress.com/2012/07/02/new-library-examples-and-features/ -- one of the replies by eg1l spelled out the solution -- I'll grant myself the liberty to repost it here, but please remember where it originally came from and link to the original article (exclusively or in addition).

mkdir ~/tmp
cd ~/tmp/
sudo apt-get install libudev-dev libusb-1.0.0-dev libfox-1.6-dev autoconf cmake

git clone git://github.com/signal11/hidapi.git
cd hidapi/
./bootstrap
./configure
cd libusb/
make
sudo make install

cd ../../

git clone git://github.com/edorfaus/TEMPered.git
cd TEMPered/
mkdir build
cd build/
cmake ..
make
cd utils/
sudo ./tempered 
cd ../
sudo make install

sudo ln -s /usr/local/lib/x86_64-linux-gnu/libtempered.so.0 /usr/local/lib/libtempered.so.0
sudo ln -s /usr/local/lib/x86_64-linux-gnu/libtempered-util.so.0 /usr/local/lib/libtempered-util.so.0
sudo ldconfig

sudo tempered
0006:000e:01 0: temperature 21.75 °C, relative humidity 49.1%, dew point 10.6 °C

Create an 80-temper.rules file in /etc/udev/rules.d:
SUBSYSTEMS=="usb", ATTRS{idVendor}=="0c45", ATTRS{idProduct}=="7401", GROUP="users", MODE="0666"
SUBSYSTEMS=="usb", ATTRS{idVendor}=="0c45", ATTRS{idProduct}=="7402", GROUP="users", MODE="0666"
SUBSYSTEMS=="usb", ATTRS{idVendor}=="0c45", ATTRS{idProduct}=="7403", GROUP="users", MODE="0666"

Then do
sudo usermod -a -G users $USER

And
sudo service udev restart

Unplug and re-plug your device, then open a new terminal and you're set (type group to make sure that users show up).

me@boron:~$ tempered
0006:000f:01 0: temperature 23.34 °C, relative humidity 46.8%, dew point 11.3 °C

1 comment:

  1. Hello,

    I get:

    /dev/hidraw8: Could not open device: Unknown device subtype string: TEMPerHumM12V1.2

    any idea?

    R.

    ReplyDelete